1.5" x 14" White Foam Low Back Pain TENS Electrode Strip

Question

Q: Can i use this with TENS 2700 or 2800? And is it OK to use only one side at a time? Thanks.

Asked by: cathy - 8/21/2015

Submit an answer

Q: Will these low back electrodes work with the InTENSity 10 unit?

Asked by: Mike - 9/9/2015

Submit an answer

Q: Is this product compatible with Tens7000?

Asked by: LAAJ - 6/14/2016

Submit an answer

Q: Is this compatible with Empi?

Asked by: Jen - 9/13/2015

Submit an answer

Q: do you need to use two of these at a time?

Asked by: dewi - 12/25/2016

Submit an answer

Q: How do you place the 1.5 x 14 in White Foam Low Back Pain Electrode Strip? Do you place it vertically up your spine, or do you place it horizontally across your lower back? I looked everywhere for this answer but could not find one...even in the "Electrode Placement Guide" that is shown when this product is selected for purchase.

Asked by: Linda - 12/27/2016

Submit an answer

Q: Is this compatible with the Intensity Select Combo DI8195 Tens, EMS, IF, Microcurrent ?

Asked by: Jo - 1/16/2017

Submit an answer

Q: Can I use 2 of the long 1.5" x 14" pads on my back simultaneously for low back pain? What would the proper placement be? Also: is there a non-conductive "bridge" (as on the "butterfly" pads) for where the pad crosses the spinal column?

Asked by: PoleStar - 11/29/2020

Submit an answer

Questions about this item? Ask here.

Accepted Answer

The Low Back Pain Electrode Strip is indeed compatible with the TENS 2800 device, as they come from the same manufacturer. To use the electrode strip, both ends of the lead wire must be connected in order to complete the positive and negative electric current. Not doing so may result in either no stimulation from the electrode, or you may end up actually shocking yourself. For any technical assistance regarding your electrotherapy supplies, you can always give us a call during operating hours and we will be more than happy to help.

Accepted Answer

A: Yes! The Low Back Electrode Strips and the InTENSity 10 are made by the same manufacturer and are indeed compatible together.

Was this answer helpful? 6 of 6 Customer(s) found this Answer helpful.

Answer provided by: TENSPros Management (9/10/2015)

Accepted Answer

A: Yes. All of our electrotherapy supplies, including devices and electrodes, come from the same manufacturer, and are thus all compatible with one another, unless explicitly stated otherwise.

Was this answer helpful? 5 of 5 Customer(s) found this Answer helpful.

Answer provided by: TENSPros Management (6/14/2016)

Accepted Answer

Unfortunately, our supplies are not compatible with EMPI devices, as all of our electrotherapy items come from a different manufacturer that makes different-sized connectors. However, all of our electrotherapy devices and supplies, are compatible with each other, unless otherwise stated.

Accepted Answer

A: This larger Electrode Strip has 2 pigtail end connectors where you can plug in 1 set of lead wires from 1 channel of an electrotherapy device. This allows you to use just 1 pad at once for 1 channel.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: TENSPros Management (12/27/2016)

Accepted Answer

A: It is more common to place the electrode strip horizontally across the lower back, but you should always consult with a doctor to see what is optimal for your particular condition and set of needs.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: TENSPros Management (12/28/2016)

Accepted Answer

A: Yes, these pads have the same industry standard 2mm pin style connection for where the lead wires plug into, as do all of the other electrodes, and so they are compatible with 99% of the devices that we carry.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: TENSPros Management (1/17/2017)

Accepted Answer

Yes, you can definitely use two of the electrode strips at the same time. Each strip will connect to one channel of your device and is powered by two lead insertions, a red and black so you can wear up to 2 strips at a time with a two channel device.
The proper placement depends on the area you are trying to treat. You want to surround your area of pain so if its the low back you can put one across the back near the top of the pain and lowed down near the bottom. If it's your mid back you can run the strips vertically up and down each side of the spine. There is not a bridge of non-conductivity, but the electrical wire inside the pad splits to cover each side so it is not directly over the spine. The whole strip is conductive though.

Quantity	Price
50 - 99	$4.25
100 - 199	$4.00
200+	$3.75

1.5" x 14" White Foam Low Back Pain TENS Electrode Strip

Quantity Discount Pricing

Average Customer Ratings

Related Items

1.5" x 14" White Foam Low Back Pain TENS Electrode Strip

Quantity Discount Pricing

Related Items

Mailing ListDEALS | UPDATES | NEWS